Fall 2020 Course Syllabus
Course: PTAC-1410- Section: 13
Process Technology I - Equipment
LSCPA Logo Image
Instructor Information
Instructor James Powell
Phone(409) 984-6344
Location:Umphrey Industrial Technology Center - Room: 201 D
Hours:MW- 7:00AM -7:55AM, 11:05AM-11:55AM: 2:50PM-4:00PM TR-7:00AM-7:55AM, 3:05PM-4:15PM
Business and Industrial Technology
Chair:Sheila Guillot
Phone:(409) 984-6381

If you have a grievance, complaint, or concern about this course that has not been resolved through discussion with the Instructor, please consult the Department Chair.
COVID 19 Information The Lamar State College Port Arthur (LSCPA) Student Code of Conduct COVID 19 Policy requires students who have been exposed to COVID 19 or diagnosed with COVID 19 to report their condition on the COVID 19 Notification Form (available via a link on the Student Code of Conduct COVID19 webpage). This information will be provided to the Dean of Student Services. In addition, this policy requires all students to wear face coverings in compliance with the criteria included in the policy. For more information please refer to the COVID 19 link on the LSCPA website.
Course Information
Description Introduction to the use of common processing equipment.
Prerequisites PTAC-1302 or Concurrent
Learning Outcomes CSLOs:
1. Describe the basic functions of process equipment. (PSLO 1); measured by embedded test questions, class discussion, and demonstration on actual process equipment

2. Describe related scientific principles associated with process equipment. (PSLO 1); measured by embedded test questions, class discussion, and demonstration on actual process equipment

3. Identify process equipment components. (PSLO 2); measured by embedded test questions, class discussion, and demonstration on actual process equipment.

4. Demonstrate ability to use terminology to describe components of process equipment. (PSLO 2); measured by embedded test questions, class discussion, and demonstration on actual process equipment.

5. Demonstrate operation of basic equipment components used in the process industries. (PSLO 3); measured by embedded test questions, demonstration on actual process equipment

6. Demonstrate safety procedures used during cleaning out, isolation, and repair of process equipment. (PSLO 4); measured by embedded test questions, demonstration on actual process equipment.

7. Demonstrate ability to identify all main ideas, supporting details, and vocabulary in reading material, Demonstrates a full understanding of the reading. (PSLO 5); measured by embedded test questions, pre- and post-test
Core Objectives * Communication skills: Students will demonstrate effective written, oral and visual communication.
* Critical Thinking Skills: Students will engage in creative and/or innovative thinking, and/or inquiry, analysis, evaluation, synthesis of information, organizing concepts and constructing solutions.
* Teamwork: Students will demonstrate the ability to work effectively with others to support a shared purpose or goal and consider different points of view.

Key Activities and Statement
Course: PTAC 1410

K2.1    Monitor and Regulate Fired Heaters/Furnace System
K2.2    Monitor and Regulate Boiler System
K2.3    Monitor and Regulate Cooling Water System
K2.5    Monitor and Regulate Heat Exchanger System
K5.2    Monitor and Regulate Flare System
Program Student Learning Outcomes PSLOs:
1. Use technology to access operator-specific documentation and training.

2. Identify specific equipment and operating parameters to meet industry standards.

3. Describe the principles of quality control.

4. Diagram the process control elements in a control loop.

5. Identify basic processes, equipment, and systems to meet industry standards.

6. Implement standard safety procedures as required in industry.

7. Demonstrate comprehension of content-area reading material.
Textbooks Textbook Purchasing Statement: A student attending Lamar State College Port Arthur is not under any obligation to purchase a textbook from the college-affiliated bookstore. The same textbook may also be available from an independent retailer, including an online retailer.

Process Technology Equipment by Pearson - ISBN-13: 978-0-13-489126-2
ISBN-10: 0-13-489126-0

Lecture Topics
FALL 2020
PTAC    1410 Process Technology I Equipment

Key Terms and Questions are due on designated date unless otherwise specified!
Week of:

Week of:
September 8     Chapter 1-Introduction to Process Equipment
Chapter 2-Process Drawings and Industry Standards
Chapter 3-Tools
Week of:
September 14        Chapter 4-Piping, Gaskets, Tubing, Hoses and Fittings
Chapter 5-Valves

Week of:
September 21     Chapter 6-Pumps Dynamic Key Terms and Questions
     Chapter 6-Pumps Continued Positive Displacement        

        Sept. 28th Last Day to drop or withdraw without academic penalty

Week of:
September 28        Chapter 7- Compressors
            Chapter 8-Turbines
Week of:    
October 5        Chapter 9-Motors and Engines / Review for Test 2
            Chapter 10-Power Transmission and Lubrication
Week of:    
October 12        Chapter 11- Heat Exchangers
     Chapter 11- Heat Exchangers continued
Week of:    
October 19        Chapter 12- Cooling Towers
            Chapter 13-Furnaces / Review Test 3

Week of:    
October 26        Chapter 14-Boilers
            Chapter 15-Vessels

November 19th Last Day to Drop or Withdraw with academic penalty

Week of:
November 2        Chapter 16-Reactors
            Chapter 16-Reactors continued

Week of:
November 9        Chapter 17-Filters and Dryers    
            Chapter 18-Solids Handling Equipment    
Week of:
November 16        Chapter 19-Environmental Control Equipment/Review Test 4
            Chapter 20-Auxiliary Equipment

Week of:
November 23         Review for Final Exam
            Thanksgiving Holiday Thursday & Friday, Nov. 26 & 27        

Week of:
November 30        Completed Final Exam Review due Dec. 1        

Week of:
December 7        Final Exam Dec. 7 Dec. 9
Graduation Friday, Dec. 11, 2020
Major Assignments
J. Powell
FALL 2020
PTAC    1410-11&12 Process Technology I Equipment

Week of:
September 8        LO/TO simulator training.
Process Drawings and Industry Standards-Tools        

Week of:
September 14        Piping, Gaskets, Tubing, Hoses and Fittings    
Valves-Identification and operation

Week of:
September 21        Pumps-Identification and operation

Week of:
September28        Compressors and Turbines
Week of:
October 5        Motors and Engines
            Power Transmission and Lubrication            
Week of:
October 12        Heat Exchangers-Identification and operation

Week of:
October 19        Cooling Towers Video and Demonstration

Week of:
October 26        Boilers and Vessels        

Week of:
November 2        Reactors Video and Design operations

Week of:
November 9        Filters and Dryers-Solids Handling Equipment

Week of:
November 16        Environmental Control Equipment

Week of:
November 23        Auxiliary Equipment
            Thanksgiving Holiday Thursday & Friday, Nov. 26 & 27        


Final Exam Date December 7, 2020 - 8:00 AM   Through  December 9, 2020 - 9:00 PM
Grading Scale  90 - 100=A    80 - 89=B    70 - 79=C     60 - 69=D    Below 59 = F
Determination of
Final Grade
Chapter Tests-33%, Quizzes/homework/labs-34% Final Exam-33%
1. You will have 4 Major Tests and a Final Exam in this class. All tests and the exam are taken in class on a specified day. There are "NO RETAKES". If you miss "ONE" Test, your lowest current test score will be given for that test, ONLY if you missed the test due to an EXCUSED absence or a makeup test will be allowed if absence is excused per the absence policy. If you miss more than one test, you will receive a zero for each additional test you miss. If you are involved in Academic Dishonesty, you will receive a ZERO for that test. Taking the Final Exam is required to complete the course. Once a test is passed out students are not allowed to leave the classroom until test completed and turned in.
2. Homework must be completed on time, 20 PTS will be deducted each class day late, for two class days. Homework more than a week late will not receive a grade higher than 50.
3. Cell Phone use is not permitted in the classroom or lab except during breaks. If a student is caught on their cell phone in class, the student will be asked to leave class and counted an unexcused absence for the day.
4. Students that are disruptive in class will be asked to leave and counted an unexcused absence for the day.
Course Policies
Instructor Policies I will not discuss your grades over the phone or by email. If you want to discuss your grades, you must come to my office, in person.

Chemical/Refining Process Technician Skill Standards
Endorsed by NAPTA
Recognized by Texas Skill Standards Board (TSSB)
Key Activities and Statement
Course: PTAC 1410

K2.1    Monitor and Regulate Fired Heaters/Furnace System
K2.2    Monitor and Regulate Boiler System
K2.3    Monitor and Regulate Cooling Water System
K2.5    Monitor and Regulate Heat Exchanger System
K5.2    Monitor and Regulate Flare System
Attendance Policy Research has shown a cause and effect relationship between attendance and college success. Missing a day of lecture can possible cause you to drop a letter grade on tests.
1. Tardiness: Tardiness (more than 5mins), for lectures or labs, 4 Tardies will count as an Absence.
2. Absences: NOTE: Excused absences (verifiable) are only allowed for, an illness that requires a hospital stay or a death in your immediate family, excluding aunts, uncles, cousins, nieces and nephews. 5 absences=drop 1 letter grade, 7 absences=drop 2 letter grades, 9-absences=drop 3 letter grades, 11 absences=F

Academic Honesty Academic honesty is expected from all students, and dishonesty in any form will not be tolerated. Please consult the LSC-PA policies (Section IX, subsection A, in the Faculty Handbook) for consequences of academic dishonesty.
Facility Policies
  1. No food or tobacco products are allowed in the classroom.

  2. Only students enrolled in the course are allowed in the classroom, except by special instructor permission.

  3. Use of electronic devices is prohibited.
Important Information
ADA Considerations The Americans with Disabilities Act (ADA) is a federal anti-discrimination statute that provides comprehensive civil rights for persons with disabilities. Among other things, this legislation requires that all students with disabilities be guaranteed a learning environment that provides for reasonable accommodation of their disabilities. If you believe you have a disability requiring an accommodation, please contact the the Office for Disability Services Coordinator, Room 231, in the Madison Monroe Building. The phone number is (409) 984-6241.
MyLSCPA Be sure to check your campus E-mail and Course Homepage using MyLSCPA campus web portal (My.LamarPA.edu). When you've logged in, click the email icon in the upper right-hand corner to check email, or click on the "My Courses" tab to get to your Course Homepage. Click the link to your course and review the information presented. It is important that you check your email and Course Homepage regularly. You can also access your grades, transcripts, and determine who your academic advisor is by using MyLSCPA.
Other I will not discuss your grades with a proxy. You must come to my office in person.
HB 2504 This syllabus is part of LSC-PA's efforts to comply with Texas House Bill 2504.