Fall 2018 Course Syllabus
Course: PTAC-1410- Section: 3D
Process Technology I - Equipment
LSCPA Logo Image
Instructor Information
Instructor Michael Sparrow
E-mailsparrowma@lamarpa.edu
Phone(409) 984-6333
Office
Location:UITC - Room: 201 E
Hours:MW 10:00am-10:30am : TR 5.00pm-6:00pm : F 11:00am-1:00pm
Department
Business and Technology
Chair:Sheila Guillot
E-mail:guillsr@lamarpa.edu
Phone:(409) 984-6381
Course Information
Description Introduction to the use of common processing equipment.
Prerequisites PTAC-1302 or Concurrent
Learning Outcomes CSLOs:
1. Describe the basic functions of process equipment. (PSLO 1); measured by embedded test questions, class discussion, and demonstration on actual process equipment

2. Describe related scientific principles associated with process equipment. (PSLO 1); measured by embedded test questions, class discussion, and demonstration on actual process equipment

3. Identify process equipment components. (PSLO 2); measured by embedded test questions, class discussion, and demonstration on actual process equipment.

4. Demonstrate ability to use terminology to describe components of process equipment. (PSLO 2); measured by embedded test questions, class discussion, and demonstration on actual process equipment.

5. Demonstrate operation of basic equipment components used in the process industries. (PSLO 3); measured by embedded test questions, demonstration on actual process equipment

6. Demonstrate safety procedures used during cleaning out, isolation, and repair of process equipment. (PSLO 4); measured by embedded test questions, demonstration on actual process equipment.

7. Demonstrate ability to identify all main ideas, supporting details, and vocabulary in reading material, Demonstrates a full understanding of the reading. (PSLO 5); measured by embedded test questions, pre- and post-test
Core Objectives Communication skills: Students will demonstrate effective written, oral and visual communication

Teamwork: Students will demonstrate the ability to work effectively with others to support a shared purpose or goal and consider different points of view.
Program Student Learning Outcomes
PSLOs:
1. Use technology to access operator specific documentation and training.

2. Identify specific equipment and operating parameters to meet industry standards.

3. Identify and adjust controls to meet requirements for safe and effective operation.

4. Implement standard safety procedures as required in industry.

5. Demonstrate comprehension of content-area reading material.
Textbooks Process TechnologyI-Equipment by Pearson - ISBN-13: 978-0-13-700412-6
ISBN-10: 0-13-700412-5
Lecture Topics
Outline
TENTATIVE SCHEDULE
FALL 2018
PTAC    1410 Process Technology I - Equipment

Week of:
August    27    Introduction to class.
        28    Chapter 1-Introduction to Process Equipment
        29    Chapter 1-Introduction to Process Equipment
        30    Lab
        31    Lab

September      3    Holiday- Labor Day
4    Chapter 2- Process Drawings and Equipment Standards
         5    Chapter 2- Process Drawings and Equipment Standards
         6    Chapter 2- lab    
         7    Chapter 2- lab
        

10    Chapter 3- Piping, Tubing, Hoses, and Fittings
        11    Chapter 3- Piping, Tubing, Hoses, and Fittings
        12    Chapter 3- Piping, Tubing, Hoses, and Fittings
        13    Lab
        14 Lab

        17    Chapter 4 Valves
        18    Chapter 4 - Valves
19    Chapter 4 Valves Complete
        20    Review for Exam 1
21 Exam1 (Chapters 1,2,3,&4 )

Sept. 28th Last Day to drop or withdraw without academic penalty

    24    Chapter 5- Tanks and Vessels
        25    Chapter 5- Tanks and Vessels        
        26    Chapter 5- Tanks and Vessels
        27    Lab            
        28    La

October     1 Chapter 6 -Pumps
         2    Chapter 6 -Pumps
3    Chapter 6 -Pumps 4    Lab
         5    Lab

         8    Chapter 7-Compressors
9    Chapter 7-Compressors
        10    Chapter 7-Compressors
        11    Lab
        12    Lab
        
        15    Chapter 8 Turbines    
16    Chapter 8 Turbines
        17    Chapter 8 Turbines        
        18    Review for Exam 2
        19    Exam 2 (Chapters 5,6,7,&, 8)

        22    Chapter 9 Electrical Distribution and Motors
        23    Chapter 9 Electrical Distribution and Motors
24 Chapter 11 Heat Exchangers ( Keys Terms)
        25    Chapter 11 Heat Exchangers ( Questions)
        26    Lab

Chapter 6 -Pumps
November 2nd Last Day to Drop or Withdraw with academic penalty
        

29    Chapter 12 Cooling Towers
        30    Chapter 12 Cooling Towers
        31    Chapter 13 - Furnaces (Heaters)
November     1    Chapter 13 - Furnaces (Heaters)
         2     Lab

5    Chapter 14- Boilers
         6    Chapter 14 - Boilers
7    Review for test 3
         8    Review for test 3
         9 Exam 3 ( Chapters 9, 11, 12, 13, & 14)

        12 Chapters 15 Auxiliary Equipment
13 Chapters 15 Auxiliary Equipment
14     Chapter 16 Tools
15     Chapter 16 Tools
16 Lab

19 Chapter 17 Separation Equipment
20 Chapter 17 Separation Equipment
        21 Lab
22 HOLIDAY (THANKSGIVING)     
        23 HOLIDAY (THANKSGIVING)
        

26    Chapters18 - Reactors
        27 Chapters18 - Reactors
        28 Chapter 21- Environmental Control Equipment
        29 Review for Exam 4
30 Exam 4 (Chapters 15,16,17,18,121)





December 03     Review for Final Exam
04 Review for Final Exam
05     Review for Final Exam

Final Exam Thursday, Dec. 6, 2018 2:00 pm - 4:00 pm

         Graduation Friday, Dec. 14
Major Assignments
Schedule
TENTATIVE SCHEDULE
FALL 2018
PTAC    1410 Process Technology I - Equipment

Week of:
August    27    Introduction to class.
        28    Chapter 1-Introduction to Process Equipment
        29    Chapter 1-Introduction to Process Equipment
        30    Lab
        31    Lab

September      3    Holiday- Labor Day
4    Chapter 2- Process Drawings and Equipment Standards
         5    Chapter 2- Process Drawings and Equipment Standards
         6    Chapter 2- lab    
         7    Chapter 2- lab
        

10    Chapter 3- Piping, Tubing, Hoses, and Fittings
        11    Chapter 3- Piping, Tubing, Hoses, and Fittings
        12    Chapter 3- Piping, Tubing, Hoses, and Fittings
        13    Lab
        14 Lab

        17    Chapter 4 Valves
        18    Chapter 4 - Valves
19    Chapter 4 Valves Complete
        20    Review for Exam 1
21 Exam1 (Chapters 1,2,3,&4 )

Sept. 28th Last Day to drop or withdraw without academic penalty

    24    Chapter 5- Tanks and Vessels
        25    Chapter 5- Tanks and Vessels        
        26    Chapter 5- Tanks and Vessels
        27    Lab            
        28    La

October     1 Chapter 6 -Pumps
         2    Chapter 6 -Pumps
3    Chapter 6 -Pumps 4    Lab
         5    Lab

         8    Chapter 7-Compressors
9    Chapter 7-Compressors
        10    Chapter 7-Compressors
        11    Lab
        12    Lab
        
        15    Chapter 8 Turbines    
16    Chapter 8 Turbines
        17    Chapter 8 Turbines        
        18    Review for Exam 2
        19    Exam 2 (Chapters 5,6,7,&, 8)

        22    Chapter 9 Electrical Distribution and Motors
        23    Chapter 9 Electrical Distribution and Motors
24 Chapter 11 Heat Exchangers ( Keys Terms)
        25    Chapter 11 Heat Exchangers ( Questions)
        26    Lab

Chapter 6 -Pumps
November 2nd Last Day to Drop or Withdraw with academic penalty
        

29    Chapter 12 Cooling Towers
        30    Chapter 12 Cooling Towers
        31    Chapter 13 - Furnaces (Heaters)
November     1    Chapter 13 - Furnaces (Heaters)
         2     Lab

5    Chapter 14- Boilers
         6    Chapter 14 - Boilers
7    Review for test 3
         8    Review for test 3
         9 Exam 3 ( Chapters 9, 11, 12, 13, & 14)

        12 Chapters 15 Auxiliary Equipment
13 Chapters 15 Auxiliary Equipment
14     Chapter 16 Tools
15     Chapter 16 Tools
16 Lab

19 Chapter 17 Separation Equipment
20 Chapter 17 Separation Equipment
        21 Lab
22 HOLIDAY (THANKSGIVING)     
        23 HOLIDAY (THANKSGIVING)
        

26    Chapters18 - Reactors
        27 Chapters18 - Reactors
        28 Chapter 21- Environmental Control Equipment
        29 Review for Exam 4
30 Exam 4 (Chapters 15,16,17,18,121)





December 03     Review for Final Exam
04 Review for Final Exam
05     Review for Final Exam

Final Exam Thursday, Dec. 6, 2018 2:00 pm - 4:00 pm

         Graduation Friday, Dec. 14
Final Exam Date December 6, 2018 - 2:00 PM   Through  December 6, 2018 - 4:00 PM
Grading Scale  90 - 100=A    80 - 89=B    70 - 79=C     60 - 69=D    Below 59 = F
Determination of
Final Grade
DETERMINATION OF FINAL GRADE: Chapter Tests-50%, Quizzes/homework/labs-25% Final Exam-25%
1. You will have 4 Major Tests and a Final Exam in this class. All tests and the exam are taken in class on a specified day. There are "NO RETAKES". Makeup test will be allowed if absence is excused per the absence policy. If you miss "ONE" Test, your lowest current test score will be given for that test, ONLY if you missed the test due to an EXCUSED absence. If you miss more than one test, you will receive a zero for each additional test you miss. If you are involved in Academic Dishonesty, you will NOT be allowed to replace the zero with your current test average. Taking the Final Exam is required to complete the course. When a test is handed out students are not allowed to leave the class until test is completed and turned in.
2. Homework must be completed on time, 15 PTS will be deducted each class day late, for two class days. Homework more than 2 class days late will not receive a grade higher than 50. Homework should be hand written.
3. Each time you are caught on your Cell Phone in the classroom or lab, will result in the student having 4 points deducted from their major test points total at the end of the semester.
4. Students that are disruptive in class will be asked to leave and counted absent for the day.
Course Policies
Instructor Policies
Attendance Policy Research has shown a cause and effect relationship between attendance and college success. Missing a day of lecture can possible cause you to drop a letter grade on tests.
1. Tardiness: Tardiness, for lectures or labs, will result in 2 point per tardy being deducted from your test points total at the end of the semester.
2. Absences: NOTE: Excused absences (verifiable) are only allowed for, an illness that requires a hospital stay or a death in your immediate family, excluding aunts, uncles, cousins, nieces and nephews. 5 absences=drop 1 letter grade, 7 absences=drop 2 letter grades, 9-absences=drop 3 letter grades, 11 absences=F
3. A student with Perfect attendance will receive 15 bonus points added to your test points total at the end of the semester.
Academic Honesty Academic honesty is expected from all students, and dishonesty in any form will not be tolerated. Please consult the LSC-PA policies (Section IX, subsection A, in the Faculty Handbook) for consequences of academic dishonesty.
Facility Policies
  1. No food or tobacco products are allowed in the classroom.

  2. Only students enrolled in the course are allowed in the classroom, except by special instructor permission.

  3. Use of electronic devices is prohibited.
Important Information
ADA Considerations The Americans with Disabilities Act (ADA) is a federal anti-discrimination statute that provides comprehensive civil rights for persons with disabilities. Among other things, this legislation requires that all students with disabilities be guaranteed a learning environment that provides for reasonable accommodation of their disabilities. If you believe you have a disability requiring an accommodation, please contact the the Office for Disability Services Coordinator, Room 231, in the Madison Monroe Building. The phone number is (409) 984-6241.
MyLamarPA Be sure to check your campus E-mail and Course Homepage using MyLamarPA campus web portal (My.LamarPA.edu). When you've logged in, click the email icon in the upper right-hand corner to check email, or click on the "My Courses" tab to get to your Course Homepage. Click the link to your course and review the information presented. It is important that you check your email and Course Homepage regularly. You can also access your grades, transcripts, and determine who your academic advisor is by using MyLamarPA.
Other
HB 2504 This syllabus is part of LSC-PA's efforts to comply with Texas House Bill 2504.